RaffertyStuder224
Natural stones are constructed with crystals. The deposits are made of different nutrients. A different crystal shape is formed by each mineral. These different deposits lock together to produce up the stone. It's a really rough texture to its surface as it breaks along the c.. when rock is first quarried.
Lots of people make the assumption that marble, marble and other quickly finished natural stones shine must be gloss has been added to them. Nothing could be further from the reality.
Natural stones are made of crystals. The deposits are made up of different nutrients. A different crystal shape is formed by each mineral. These different crystals lock together to create up the rock. It has a very rough texture to its surface as it breaks along the crystal joints when stone is first quarried. With a group of graduated mills the rock is ground down. The mills are often created from industrial diamonds and to start out the process a really difficult one is used. It is the same theory as sanding down wood. You start with glass paper that's very coarse and steadily use finer and finer glass paper until you have a superb, smooth end to the wood. With stone the glass paper is replaced with diamond studded patches and these get finer and finer.
What the farming does is cutting the rough edges off the rock by scratching it and because the diamonds become smaller and smaller the scratches become better and finally microscopic. What you get is a very smooth surface to the stone. Until on the surface they are all smooth and perfectly level with each other the crystals have by way of a slow means of finer and finer grinding been worn down. A perfectly flat working surface will look like glass and will reflect the light evenly.
Consider a mirror that reflects light uniformly giving you an obvious sharp image. Make the glass bent or rippled and a less clear, less sharp image is got by you reflected back. Exactly the same relates to stone. Then you get a great image reflected straight back if the crystals are flat and the stone appears incredibly gleaming. The reflected light and roughen the surface somewhat ceases to give you a perfect representation and the rock begins to dull. Any interference with the stones area could cause this dulling to appear. It could be a number of minute scratches made by dirt or it could be caused by p supplies etching into the stone destroying its shine in that area.
To obtain the sparkle back the stone should be ground down again. Subsequently the glow on a stone is not the solution of adding some chemical to the stone but is a house of the stone itself.. The harder the rock the more difficult it is to work nevertheless the higher degree of shine that can be accomplished, which explains why slick marble has got the greatest degree of shine, followed closely by marble then limestone. mid strength lash glue critique
