Under Cabinet LED Lighting ..... Ideas On How To Add Variation And Fashion To All Kitchen.
Under cabinet LED lighting is the best way to lighten up any kitchen. A set of LED recessed lighting can cheer up and display your surfaces. It used to be a major undertaking to try and install under cabinet LED lighting but fortunately there are kits available now that make it easy. There are some ways to do the job so read on for a few under cabinet LED lighting How-To tips.
When purchasing under cabinet LED lighting you have few options available. You can decide on either a small direct spot light or full extent recessed fluorescent pipes. Both offer a stylish look to accent the kitchen. It just boils down to personal choice.
For the sake of simplicity let's look at putting in a set of lights which doesn't need to be hardwired back to your primary circuit panel.
The first step is to go down to the hardware store and choose an under cabinet LED lighting kit.
As soon as you've decided on the correct light for your kitchen, unit installation is a breeze.
Compute the entire length of your cabinets. This will determine how many light bulbs you need. A good general guideline is to use 1 spot light every 18 inches.
Start the first bulb far enough from the end of the cabinets to permit equal spacing of all the lights.
Get a few small finish nails to tack the LED lights to the base of the cabinets. Make sure the nail is short enough that it won't protrude entirely through the base of the cabinet.
Continue tacking lights up until you get the end of the string.
Place an inline splice directly into the under cabinet lighting wires as close as possible to an electrical wall plug. The cabinet lighting box should have this included in it.
Now splice the power switch of the lighting into this wire. Cut down any excess line and link up an electrical plug to the end of the wire.
Next work with a staple gun to staple up the wiring. Be careful to center the cord in the staple to prevent cutting into the wire. If the wire is long to lay flush in a straight line between the lights you can also snake it along the underside of the cabinet. Since the wires and lights are hidden it doesn't matter how the electrical wiring is run, you can't see it.
The final step is to finish work on the lights. Working through the light string, pop bulbs into the sockets making sure they're tight. After all the lights are hooked up simply snap on the nice outside covers and that's it, you're done!
Hook up the LED lights and flick the switch. Stick your head under the counter to ensure that all the LED lights come on.
These handful of under cabinet LED lighting How-To tips can help facilitate the installation of distinctive kitchen lighting system. There are numerous options available, all you need to do is spend a little time searching for just the right one that is compatible with your kitchen. Click here
